产品搜索

首页 > 产品中心 > 喷砂机系列喷砂机系列

加压式模具喷砂机

产品特点 Product features

喷砂机主要用于电镀、喷漆、喷涂等所有被覆盖加工前喷砂处理;旧样翻新清洗;金属制品及塑胶、水晶、玻璃等表面痕迹消除,哑光雾面处理,使产品表面提升档次;机加工零件微小毛刺去除;增加金属件表面硬度,消除应力如弹簧、机加工刀具等;金属制品及非金属制品表面刻蚀图案、文字及防滑处理,如大理石、印章、手柄防滑等。本机应用范围:适用于大量中小型一般工件及高硬度工件的快速喷砂。如发动机配件、阀门、热处理工件等。该机型设计新颖,结构科学合理,操作方便,加工性能优越;喷砂速度快,撞击点深。

 

Features: Sandblasting machine is mainly used in electroplating, paint, coating area to-be-covered before piating; Old way of refurbished cleaning; Metal products and plastic, crystal, glass surface trace eliminate scattered, dumb, surface process to enhance the grade of the product's surface; Machining parts tiny burrs purify; Increase the metal surface hardness, eliminate stress such as spring, mechanical cutters, etc.; Metal and non-metai products surface etching pattern, writing and prevent slippery processing, such as marble, seals, and handle prevent slippery, etc. The machine is applied the range: applicable to small and medium-sized general of workpiece and high hardness workpieces quickly sandblasting. Such as engine fittings, valves, heat treatment workpiece, etc. This machine has novel, scientific design and reasonable structure, convenient operation, processing superior performance; Gush arenaceous speed, the impact point at deep.